iRV2 Forums

iRV2 Forums (https://www.irv2.com/forums/)
-   Fleetwood Owner's Forum (https://www.irv2.com/forums/f107/)
-   -   Bounder: 2014 Bounder 35k vacuum pump assembled. Now power wonít turn on. Yeesch (https://www.irv2.com/forums/f107/2014-bounder-35k-vacuum-pump-assembled-now-power-won-t-turn-on-yeesch-544144.html)

mrsportys 07-05-2021 10:15 AM

2014 Bounder 35k vacuum pump assembled. Now power wonít turn on. Yeesch
 
Iíve documented on here the fun getting the vacuum pump out and rebuilt. Actually itís not a monster deal UNLESS the pvc piping pops out of the black tank inaccessible to the right of where pump sits.
You can tell Fleetwood put this whole assembly together after the unit was built just the way piping was mismashed together.
Anyway, took my time, rebuilt piping and getting 1 1/2Ē pvc back into gasket into black tank.
( another story of cutting steel to access it)
Only two wire connections by pump, one with two wires for motor the other part of a gang of wires that mounts on the pump and snaps in. Previous tries at turning pump on were successful. This time no dice.
Wires tight, fuse?? Doesnít describe fuse in box above propane tank.
Donít really see fuses behind drawers to the left of circuit breaker panel.
Any thoughts on why switch does not turn on?
Thanks!!

mrsportys 07-05-2021 11:21 AM

1 Attachment(s)
Quote:

Originally Posted by mrsportys (Post 5819196)
Iíve documented on here the fun getting the vacuum pump out and rebuilt. Actually itís not a monster deal UNLESS the pvc piping pops out of the black tank inaccessible to the right of where pump sits.
You can tell Fleetwood put this whole assembly together after the unit was built just the way piping was mismashed together.
Anyway, took my time, rebuilt piping and getting 1 1/2Ē pvc back into gasket into black tank.
( another story of cutting steel to access it)
Only two wire connections by pump, one with two wires for motor the other part of a gang of wires that mounts on the pump and snaps in. Previous tries at turning pump on were successful. This time no dice.
Wires tight, fuse?? Doesnít describe fuse in box above propane tank.
Donít really see fuses behind drawers to the left of circuit breaker panel.
Any thoughts on why switch does not turn on?
Thanks!!



Update. The reset button which was supposed to be behind circuit breaker panel is not there. Thank goodness to others on the panel I saw that it may be above propane tank this time to the left of fuse box.
Alas, pushed in and nothing.
Turned generator on full power to unit. There is a electrical reset right next to pump switch in bathroom nothing.
Thinking of going into pump area again and pulling wire trains again and putting back together.
Running out of ideas.....Attachment 334801


All times are GMT -6. The time now is 09:19 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.