iRV2 Forums

iRV2 Forums (https://www.irv2.com/forums/)
-   Alpine Coach Owner's Forum (https://www.irv2.com/forums/f104/)
-   -   No power to RR jack solenoid (https://www.irv2.com/forums/f104/no-power-to-rr-jack-solenoid-546825.html)

ralt59 07-24-2021 08:36 PM

No power to RR jack solenoid
 
2001 Alpine 38 FDDS was changing RR jack solenoid, have on power to solenoid . Used wire from LR jack and soleniod and jack works. Are Jack soleniods fused if so were would a person find them? or what else could it be.

HarryStone 07-24-2021 10:59 PM

what brand of jacks are they?

Skip426 07-24-2021 11:04 PM

1 Attachment(s)
HWH leveling jacks of your vintage have an individual fuse for each solenoid .

If your levelers are HWH and you can identify the series , we can get you a manual .

ralt59 07-25-2021 07:23 AM

Quote:

Originally Posted by HarryStone (Post 5845185)
what brand of jacks are they?

HWH 310 series with air dump.

ralt59 07-25-2021 07:26 AM

HWH 310 series with air dump were would fuses be?

Skip426 07-25-2021 09:41 AM

2 Attachment(s)
One end of the control box , mine is under the dash .

One 10 amp fuse for each solenoid .

ralt59 07-25-2021 11:55 AM

Thank you I found those thry're good.

ralt59 07-25-2021 06:55 PM

Quote:

Originally Posted by HarryStone (Post 5845185)
what brand of jacks are they?

Quote:

Originally Posted by Skip426 (Post 5845187)
HWH leveling jacks of your vintage have an individual fuse for each solenoid .

If your levelers are HWH and you can identify the series , we can get you a manual .

It looks like I have series 310 with air dump, Would a manual have wire diagram? and how could I get a manual.Thanks

HarryStone 07-25-2021 09:00 PM

https://www.hwhcorp.com/ml13514.pdf

Skip426 07-25-2021 10:59 PM

My coach also has the 310 series with air dump .

Because the jacks operate in pairs ( both right side jacks are controlled by one up button ; both rear jacks by another ) if the RF jack is controlled by the key pad raise right button and the LR jack is controlled by raise rear button , then the key pad is functioning properly and you can narrow your search to testing the control box output wiring , if you have no output from the box to control the solenoid , then internal problems in the box .

Some control boards and boxes are able to be rebuilt at the HWH facility .

Paul Maddox ( AKA ; AZPete here in the forums ) works for HWH and gives advice on the systems when contacted by members of iRV2.
His e mail is . pfmaddox@att.net , or phone 1-602-549-3836 or 1-928-225-5329


All times are GMT -6. The time now is 07:16 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.