iRV2 Forums

iRV2 Forums (https://www.irv2.com/forums/)
-   Entegra Owner's Forum (https://www.irv2.com/forums/f278/)
-   -   44B back bath hot water (https://www.irv2.com/forums/f278/44b-back-bath-hot-water-546899.html)

TravelSmiths 07-25-2021 12:40 PM

44B back bath hot water
 
We just recently lost the hot water to the rear bath sink. Still have hot water in the shower. When running water I can feel the hot water feeder line and it is only slightly warm. Check the valve on the faucet and everything is good with the valve.
Any ideas ? 2014 Aspire

Old-Biscuit 07-25-2021 12:47 PM

So you have FLOW using Hotside of faucet but water is NOT HOT???

Hot water plumbing system is same for ALL faucets/showers

Do you have a Hot/cold Manifold ??
Check there for HOT to that sink faucet

NO Manifold...
Then Sink Faucet Cartridge is suspect...

billb3672 07-25-2021 03:58 PM

Check your valves in the outside wet bay
 
We had a similar issue and the water valves for the little outside spray hose in the wet area, had the valves open, then the water just circulates and you may only get lukewarm water. Close these valves if they are open. If you are in a cool climate and the thermostat in the storage compartment is set above the ambient outside temperature, this can also cause it. Turn the thermostat lower or off if it is not freezing, but this time of year I doubt it is that cold!


All times are GMT -6. The time now is 08:04 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2022, vBulletin Solutions, Inc.