iRV2 Forums

iRV2 Forums (https://www.irv2.com/forums/)
-   5th Wheel Discussion (https://www.irv2.com/forums/f44/)
-   -   Dryer Vent (https://www.irv2.com/forums/f44/dryer-vent-546922.html)

nanab65 07-25-2021 01:56 PM

Dryer Vent
 
Need help with our 2008 grand junction 5th wheel model# 34trg dryer.Located vent hose in basement need to find how to tap into it? PLEASE!

Fishar 07-25-2021 02:07 PM

Quote:

Originally Posted by nanab65 (Post 5845852)
Need help with our 2008 grand junction 5th wheel model# 34trg dryer.Located vent hose in basement need to find how to cap into it? PLEASE!

Are you sure you found the dryer vent and not a heating duct? Most dryers vent out the sidewall.

Where is your washer dryer located?

hamm2018 07-25-2021 03:26 PM

Quote:

Originally Posted by nanab65 (Post 5845852)
Need help with our 2008 grand junction 5th wheel model# 34trg dryer.Located vent hose in basement need to find how to tap into it? PLEASE!

Like said that is probably a heat duct for your furnace.
Wherever your dryer goes you will need to get a hole into the side and vent it out there. So there comes an issue of finding the wall supports making sure you do not cut thru one of these.

Edd505 07-26-2021 08:40 PM

4 Attachment(s)
#1 Dryer vent hole
#2 Washer/dryer in place
#3 Outside vent
#4 heater

The dryer hose goes of the back and straight outside. Like has been stated the flexible aluminum in the basements heater.


All times are GMT -6. The time now is 03:24 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.