iRV2 Forums

iRV2 Forums (
-   Class A Motorhome Discussions (
-   -   OBD2 Code Readers (

somekevinguy 02-19-2011 08:43 AM


Originally Posted by Hudsoner (Post 793341)
Well, I guess it is back to Scan Gauge.

My thoughts exactly. Tranmission temp is one of the main reasons I was looking into these things in the first place. I am definitely looking forward to having the fuel information now also. It is too bad. That Ultra Gauge would be so sweet and such a bargain if they would just add the vehicle specific gauges like Scan Gauge. Seem like it would be so easy to do.

somekevinguy 02-19-2011 08:50 AM


Originally Posted by Richie (Post 762072)
Thanks guys. I have the scan gauge. I wanted something pacificly to read the codes. I'll keep looking. I will be buying a Equus 3100 for my cars and hope it works on the M/H.

The scan gauge reads codes already. I don't understand why you want to go out and spend more money to get an additional box that reads codes. If you just want to read basic engine codes any obd II scanner will work on your V10 just like the scan gauge does.

Richie 02-19-2011 07:50 PM

OBD2 code reader
Tried a scan guage but it doesn't read the transmission temperature. Called scan gauge and they gave me a new code to program but I don't know how to program it into the scan gauge. I have read the instruction manual an no mention of reprograming a different code. Any help please!

isa 02-21-2011 09:39 AM

Here are the steps to reprogram a new guage / output:

Displaying Vehicle Specific Gauges
You can add vehicle specific gauges to your ScanGauge.
  • To start, from the HOME screen use MORE>MORE>MORE>XGAUGE
  • Then in the top right, select the number of the XGauge memory you want to use (0 to 24)
  • Next <EDIT this will take you to the TXD screen
  • Using the commands link at the top of this page find your car and enter the values shown in the TXD, RXF, RXD, MTH, and NAME portion of the page
  • When entering values, the buttons on the left are + and - to change characters up and down, on the top right is -> to move to the next space, and OK>
  • The NAME does not have to be the one provided on the spreadsheet, those are only suggestions
  • Lastly press SAVE
Now you can select your new gauge just like any other one. From the home screen, press GAUGE press the button next to the gauge you want to use for the XGauge. Keep pressing as needed until your newly created XGauge name appears.
X-gauge values for Ford PWM transmission fluid temperature (TFT):
TXD C410F1221674
RXF 046205160674
RXD 3010
MTH 000100080000

X-gauge values for Ford CAN transmission fluid temperature (TFT):
TXD 07E0221674
RXF 046205160674
RXD 3010
MTH 000100080000

Richie 02-21-2011 11:52 AM

Thanks ISA, thats what I was looking for.

jeepfreak 02-23-2011 03:36 PM

From what I understand if you have the allison 6 speed the scan gauge still cannot read trans temp. But I do believe they are trying hard to rectify that. I'm waiting till they have figured and then will purchase one.

All times are GMT -6. The time now is 06:03 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.