Free 7 Day Trial RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > Search Forums
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Showing results 1 to 50 of 118
Search took 0.01 seconds.
Search: Posts Made By: basketball
Forum: Fleetwood Owner's Forum 01-14-2022, 08:18 AM
Replies: 11
Views: 497
Posted By basketball
The closet floor is removed by 4 screws. They are...

The closet floor is removed by 4 screws. They are not behind the wall. 2 " from the wall. You can see them from underneath. Look up from your coach battery location. Flat head screws. The carpet...
Forum: Fleetwood Owner's Forum 01-13-2022, 10:25 AM
Replies: 11
Views: 497
Posted By basketball
I have a 2008 40X Discovery(6.7 cummins).The...

I have a 2008 40X Discovery(6.7 cummins).The floor in the closet will give you access to the fan shroud. Hard to get access to CAC for cleaning. I found that the best access was from the bottom...
Forum: Fleetwood Owner's Forum 01-04-2022, 09:03 AM
Replies: 15
Views: 877
Posted By basketball
It is not the deadbolt that locks and cannot be...

It is not the deadbolt that locks and cannot be unlocked. It is the door handle from outside that will not operate the door slide to open the door. Nothing is locked. It will not match up with the...
Forum: Fleetwood Owner's Forum 01-03-2022, 06:06 PM
Replies: 15
Views: 877
Posted By basketball
I have a 2008 Discovery with a main door entry...

I have a 2008 Discovery with a main door entry problem.
I did lock myself out of the coach.
Closed the door, all locks were unlocked and door would not open. All windows locked.
I am now locked...
Forum: Fleetwood Owner's Forum 01-01-2022, 07:26 PM
Replies: 4
Views: 251
Posted By basketball
Make sure the electric brake/clutch leaver is in...

Make sure the electric brake/clutch leaver is in the correction position. The screw jack will wind down if clutch is not in correct position to lock in.
Forum: Fleetwood Owner's Forum 01-01-2022, 07:07 PM
Replies: 6
Views: 322
Posted By basketball
In drivers side compartment. Beside water service...

In drivers side compartment. Beside water service bay/water filter. Make sure you have the levers for fresh water tank fill in correct position.
Mark 2008 Discovery 40X
Forum: Class A Motorhome Discussions 12-30-2021, 08:30 AM
Replies: 5
Views: 197
Posted By basketball
What make is your camera. Sony works on 8 volts....

What make is your camera. Sony works on 8 volts. Replaced mine twice.
2008 Discovery 40x.
Forum: Fleetwood Owner's Forum 12-25-2021, 08:32 AM
Replies: 5
Views: 598
Posted By basketball
I have a 2008 Discovery. It has a high idle...

I have a 2008 Discovery.
It has a high idle speed on the cruse control. Push the set button in when on idle. RPM will increase to about 1000. Turn of cruse to set to normal rpm.
Forum: Freightliner Motorhome Chassis Forum 12-25-2021, 07:39 AM
Replies: 6
Views: 349
Posted By basketball
Replaced Horton fan clutch in 2008 Discovery. Had...

Replaced Horton fan clutch in 2008 Discovery. Had to remove Rad, CAC to gain access to fan clutch.
If more info needed e-mail. You may want to go to a direct drive high- performance fan and delete...
Forum: Class A Motorhome Discussions 12-24-2021, 09:55 AM
Replies: 25
Views: 2,449
Posted By basketball
I have a 2008 Discovery 40X/6.7 Cummins by...

I have a 2008 Discovery 40X/6.7 Cummins by Fleetwood.

This will be the last fleetwood I buy.
I would buy a Tiffin If I was to upgrade.
Go with the side rad, you will be much happier.
Forum: Freightliner Motorhome Chassis Forum 12-21-2021, 09:30 AM
Replies: 9
Views: 671
Posted By basketball
Yes I have a relay. On the control board, beside...

Yes I have a relay. On the control board, beside fuse.
Forum: Class A Motorhome Discussions 12-19-2021, 09:38 AM
Replies: 12
Views: 648
Posted By basketball
2008 Discovery I had heater linkage come off in...

2008 Discovery
I had heater linkage come off in the dash. Can you hear the doors moving when you change from defrost to cab heat?

As for the shaking, were you towing a toad? If so try driving MH...
Forum: Freightliner Motorhome Chassis Forum 12-19-2021, 09:19 AM
Replies: 9
Views: 671
Posted By basketball
The fan logic in the ecm has to be set up...

The fan logic in the ecm has to be set up correctly to send 12 volts to the Horton fan to turn on or turn off clutch fan. My 6.7 cummins (2007.5) is set up in logic to remove 12 volts and fan goes...
Forum: Cummins Engines 11-04-2021, 10:26 AM
Replies: 11
Views: 737
Posted By basketball
Are you on the road again? Keep us posted on...

Are you on the road again?

Keep us posted on outcome of your turbo c/w actuator.
Forum: Cummins Engines 11-04-2021, 08:30 AM
Replies: 249
Views: 74,144
Posted By basketball
Check basketball replies on clutch fan.

Check basketball replies on clutch fan.
Forum: Cummins Engines 11-03-2021, 09:23 AM
Replies: 15
Views: 815
Posted By basketball
Replaced my stat on my ISB 6.7. Number of part...

Replaced my stat on my ISB 6.7. Number of part came from cummins. This T-stat has been superseeded 3/4 times. Order from Cummins and pay the price.

One phone call to Cummins and you will have the...
Forum: Cummins Engines 11-01-2021, 09:13 AM
Replies: 11
Views: 737
Posted By basketball
Did your turbo come complete with a Actuator? If...

Did your turbo come complete with a Actuator? If not your actuator will have to be parred with the rebuilt turbo. Cummins Insite software will be required on site.

Keep us posted.
Forum: Cummins Engines 10-31-2021, 09:31 AM
Replies: 85
Views: 8,995
Posted By basketball
Did your mobile tech test your actuator with his...

Did your mobile tech test your actuator with his software???

Or just setup the new one you purchased??

Before sending your actuator back for the core refund, I would try and find a turbo shop...
Forum: Cummins Engines 10-30-2021, 06:52 PM
Replies: 85
Views: 8,995
Posted By basketball
Could it have been the sensor ? These will...

Could it have been the sensor ? These will de-rate the engine and go into limp mode.

Like i said, it may be wise to pick one of these up for your tool box.

You will know if it happens again.
Forum: Cummins Engines 10-30-2021, 04:31 PM
Replies: 85
Views: 8,995
Posted By basketball
Great news, now you know, do not remove actuator...

Great news, now you know, do not remove actuator from turbo untill you have In-site software to calabrate actuator and then calabrate to turbo.

I can only assume that under load from the exhust...
Forum: Cummins Engines 10-29-2021, 04:41 PM
Replies: 85
Views: 8,995
Posted By basketball
Insite software, i have been told is about...

Insite software, i have been told is about $3000.00
Not something I would buy.
If there is something else that would work, I would like to know.
Wolf any other software to download ECM cummins,...
Forum: Cummins Engines 10-29-2021, 12:06 PM
Replies: 85
Views: 8,995
Posted By basketball
Hope it works. Has the actuator arrived yet?

Hope it works.
Has the actuator arrived yet?
Forum: Cummins Engines 10-29-2021, 10:10 AM
Replies: 85
Views: 8,995
Posted By basketball
There is a Turbo boost sensor (4928593) and temp...

There is a Turbo boost sensor (4928593) and temp sensor in the system. (4088832)

These sensors feed info back to the ECM to control boost and temp.

Just read about them. Search, Google, turbo...
Forum: Cummins Engines 10-29-2021, 07:08 AM
Replies: 85
Views: 8,995
Posted By basketball
1. In-site program to calibrate the actuator...

1. In-site program to calibrate the actuator while hooked up to ECM and not installed on turbo.
2. Set turbo pie gear on turbo via hole in pie gear and hole in turbo housing.Make sure you have 1/2...
Forum: Cummins Engines 10-28-2021, 11:05 AM
Replies: 85
Views: 8,995
Posted By basketball
Keep us posted on outcome

Keep us posted on outcome
Forum: Cummins Engines 10-28-2021, 10:36 AM
Replies: 85
Views: 8,995
Posted By basketball
Go to Turbo Actuator Repair Service / Rebuild...

Go to Turbo Actuator Repair Service / Rebuild Service (https://WWW.Turboactuatorrepair.com)

Read about test for actuator and gearbox in actuator. You may have a gearbox issue if you can spin gear....
Forum: Cummins Engines 10-28-2021, 09:55 AM
Replies: 85
Views: 8,995
Posted By basketball
Not sure if actuator should spin. It is on a gear...

Not sure if actuator should spin. It is on a gear setup and should only rotate on power up.

It does have to rotate when required for turbo boost. Not be your fingers and spin. Could be a gear...
Forum: Cummins Engines 10-28-2021, 09:50 AM
Replies: 85
Views: 8,995
Posted By basketball
From input of cac to output of cac to turbo....

From input of cac to output of cac to turbo. Hoses, clamps?
Forum: Cummins Engines 10-28-2021, 09:49 AM
Replies: 85
Views: 8,995
Posted By basketball
Have you checked the CAC hoses and clamps?

Have you checked the CAC hoses and clamps?
Forum: Cummins Engines 10-28-2021, 08:50 AM
Replies: 85
Views: 8,995
Posted By basketball
I am on line this morning, if more info required...

I am on line this morning, if more info required respond to form.
Basketball Junkie
Forum: Cummins Engines 10-28-2021, 08:44 AM
Replies: 85
Views: 8,995
Posted By basketball
Once you remove the actuator and find the...

Once you remove the actuator and find the problem, Turbo or Actuator you have to have software to set up the 2 pieces. The actuator goes to the home position every time you power up. The turbo has to...
Forum: Cummins Engines 10-26-2021, 09:15 AM
Replies: 15
Views: 677
Posted By basketball
Found it at local store. www.princessauto.com ...

Found it at local store.
www.princessauto.com
Part # 8553380.
The fused link holder is an ATO fuse.
Cut off the spare lead or tape and store.
Cut the lead(middle) that goes back to the ATM...
Forum: Cummins Engines 10-24-2021, 09:03 AM
Replies: 15
Views: 677
Posted By basketball
Looking for a ATM mini fuse holder, 2 leads from...

Looking for a ATM mini fuse holder, 2 leads from holder.
I would like to pull the fan fuse in the Arins fuse box.
Add a 2 wire fuse insert ( no fuse).
Connect an inline fuse and run the leads to...
Forum: Cummins Engines 10-21-2021, 09:03 AM
Replies: 11
Views: 737
Posted By basketball
Turbo Replacement

Not sure if 2004 coach cummins engine's turbo is controlled by a westgate or an actuator. If an electrical actuator it has to be set up with the turbo, via insite software. There are different...
Forum: Cummins Engines 10-09-2021, 10:48 AM
Replies: 15
Views: 677
Posted By basketball
According to Horton, The fluid in the fan needs...

According to Horton, The fluid in the fan needs time to relocate for full speed operation.

Could be 5-6 min, but not seconds. Seconds would be great.
Forum: Cummins Engines 10-07-2021, 08:18 AM
Replies: 15
Views: 677
Posted By basketball
Trying to verify if ECM is removing the 12v from...

Trying to verify if ECM is removing the 12v from the clutch fan when engine temp overheats. 0 volts on fan fuse should make Horton clutch fan go into high speed.
Temp gauge says 200 to 225 and then...
Forum: Cummins Engines 09-23-2021, 08:44 AM
Replies: 15
Views: 677
Posted By basketball
Have installed new stat in 6.7 Cummins. B4...

Have installed new stat in 6.7 Cummins. B4 installing boiled both on stove.
It did appear that the new stat did open wider than the old stat. will be taking out for a test run this weekend.

I...
Forum: Cummins Engines 09-16-2021, 09:07 AM
Replies: 15
Views: 677
Posted By basketball
I am bring the coach home this weekend. I will...

I am bring the coach home this weekend. I will pick up a T-stat from Cummins and install. There has been many up grades from the original T-stat. 4 up-grades. There must be a reason for these part...
Forum: Cummins Engines 09-15-2021, 12:56 PM
Replies: 15
Views: 677
Posted By basketball
The water flow from the lower rad hose is just...

The water flow from the lower rad hose is just warm, from there it goes into the tranny cooler. The water is warmer at the output end of the tranny cooler. From there it goes back to the block. ...
Forum: Cummins Engines 09-15-2021, 10:51 AM
Replies: 15
Views: 677
Posted By basketball
225 degrees Had rad and CC in rad shop. 190...

225 degrees
Had rad and CC in rad shop.
190 to 195 temp
yes to gear down when climbing grades
Forum: Cummins Engines 09-15-2021, 09:40 AM
Replies: 15
Views: 677
Posted By basketball
Cummins 6.7 ISB Rad water flow

Top rad hose is hot, lower rad hose is cold/warm.
Has any one had problems with T stat or water pump? These two parts are original from 2008.
Seems to overheat when pulling grades with toad....
Forum: Freightliner Motorhome Chassis Forum 05-09-2021, 08:11 AM
Replies: 31
Views: 3,074
Posted By basketball
Please keep us posted on the install of your...

Please keep us posted on the install of your direct fan. Good info for all
Forum: Freightliner Motorhome Chassis Forum 04-25-2021, 07:39 AM
Replies: 22
Views: 1,762
Posted By basketball
Well Mervman, if there is an easy way , let me...

Well Mervman, if there is an easy way , let me know. There is no access from the bottom as a result from the frame cross member. From the top only have 1.5 " between the coach build out and the...
Forum: Freightliner Motorhome Chassis Forum 04-24-2021, 05:47 PM
Replies: 22
Views: 1,762
Posted By basketball
My Model is a Discovery 40x. The bolt that holds...

My Model is a Discovery 40x. The bolt that holds the guide bracket for the clutch fan has to be removed to slide the belt between the fan serp pully and the air pump.
Yes the air cleaner has to be...
Forum: Cummins Engines 04-24-2021, 05:29 PM
Replies: 9
Views: 564
Posted By basketball
Cummins owns Holset Turbo. Had my Turbo rebuilt...

Cummins owns Holset Turbo. Had my Turbo rebuilt by others(Edmonton AB), rather than Holset/Cummins
Cummins was just to expensive
Complete job cost $4500.00 CAD, rebuilt Turbo and rebuilt actuator....
Forum: Cummins Engines 04-24-2021, 08:39 AM
Replies: 15
Views: 1,233
Posted By basketball
Check the diode bridge in the alternator. Wih...

Check the diode bridge in the alternator. Wih output of 7 volts, sounds like you have blown a diode in the alternator. The diodes come on a card that can be replaced easy.

Cost is about $25.00
...
Forum: Cummins Engines 04-24-2021, 08:35 AM
Replies: 9
Views: 564
Posted By basketball
Keep us posted William.

Keep us posted William.
Forum: Freightliner Motorhome Chassis Forum 04-22-2021, 08:16 AM
Replies: 22
Views: 1,762
Posted By basketball
Going to inspect to see how to change serp belt...

Going to inspect to see how to change serp belt on 2008 freightliner ISB 6.7 , c/w Horton fan clutch. The bracket that holds the sensor from the engine block to the fan clutch has a bolt in the...
Forum: Cummins Engines 04-22-2021, 07:56 AM
Replies: 3
Views: 373
Posted By basketball
Use t-bolt clamps for rad hose. Had worm type...

Use t-bolt clamps for rad hose. Had worm type clamp break(rusted s/s clamp) on upper rad hose.
Forum: Cummins Engines 04-22-2021, 07:46 AM
Replies: 9
Views: 564
Posted By basketball
I had my actuator , which was working fine(tested...

I had my actuator , which was working fine(tested after it was removed) replaced with the Turbo. If the actuator goes you are back to square 1 again.
Showing results 1 to 50 of 118

 
Forum Jump
» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 12:41 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2022, vBulletin Solutions, Inc.