|
06-28-2020, 05:21 PM
|
#1
|
Member
Join Date: Nov 2013
Posts: 35
|
Atwood heating element
Have an Atwood hot water heater gc10a-4e.
Installed a new heating element 2 weeks ago but It was a short one. Bought a new longer one. When I installed the short one I hand tightened it and then just gave it a little snug up. Now I can’t get it out. It won’t budge. Any help would be appreciated.
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
06-28-2020, 06:44 PM
|
#2
|
Senior Member
Join Date: Apr 2011
Location: Powell River, B.C.
Posts: 31,486
|
Are you using the RV store “ tool “? To install the element.
If so got to an auto parts store and tell them you want a 1/2” drive 1 1/2” six point socket . That socket and your 1/2” drive ratchet you should be able to remove the element.
Question though , both long and short elements are the same watts, do you think the long one will give more hot water?
__________________
99DSDP 3884, Freightliner, XC, CAT 3126B, 300 HP /ALLISON 3060
2000 Caravan toad, Remco & Blue Ox.
|
|
|
06-29-2020, 02:16 PM
|
#3
|
Member
Join Date: Nov 2013
Posts: 35
|
Atwood heating element
Yes have tried 1 1/2” 6 point socket with a breaker bar, won’t budge. Yes I think the longer element would heat faster. I believe the tank is aluminum & the threads in the element are steel, could that be the problem? I know the propane side really heats that water to a high degree.
|
|
|
06-29-2020, 03:23 PM
|
#4
|
Senior Member
Join Date: Apr 2011
Location: Powell River, B.C.
Posts: 31,486
|
Distribution of the heat over the length of the element is the difference , being the same # watts , the water won't get any hotter .
I believe the Atwood W/H, t'stats are available in different temps , might be worth looking into.
__________________
99DSDP 3884, Freightliner, XC, CAT 3126B, 300 HP /ALLISON 3060
2000 Caravan toad, Remco & Blue Ox.
|
|
|
06-30-2020, 07:39 AM
|
#5
|
Senior Member
Join Date: Mar 2019
Posts: 474
|
Quote:
Originally Posted by McLindy
Yes have tried 1 1/2” 6 point socket with a breaker bar, won’t budge. Yes I think the longer element would heat faster. I believe the tank is aluminum & the threads in the element are steel, could that be the problem? I know the propane side really heats that water to a high degree.
|
I’d probably try heating a tank of water, then shutting off power, shutting off the water source and draining a little hot water from a faucet. The slightly expanded hot tank may make it easier to remove the element.
|
|
|
06-30-2020, 09:41 AM
|
#6
|
Moderator Emeritus
Join Date: Jan 2000
Location: West Palm Beach, FL. USA
Posts: 27,704
|
Watts are watts, so both electric element sizes produce the same amount of heat. The propane burner produces more btus of heat while running, but the water doesn't get any hotter because the thermostat just shuts the gas burner off sooner. The max water temperature is controlled by the thermostat and is the same whether electric or propane.
To remove the element, I'd try jkwilson's suggestion.
__________________
Gary Brinck
Former owner of 2004 American Tradition and several other RVs
Home is West Palm Beach, FL
|
|
|
06-30-2020, 10:21 AM
|
#7
|
Senior Member
Join Date: Jan 2017
Location: Titusville, FL
Posts: 5,164
|
I agree with Gary. The length of the heating element is irrelevant. Watts is watts. I wouldn't worry about changing it but might be concerned with the difficulty of removing it. If you get it out you might want to try a little anti seizing compound on the threads.
__________________
When seconds count, the police are only minutes away.
2023 Grand Design 2600RB, 2022 F-350 King Ranch tow vehicle, Titusville, FL when not on the road
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|